Surface Prep, Polished Concrete & Terrazzo

Surface Preparation professionals face some of the toughest challenges when it comes to dust collection. The fine, abrasive nature of dust from concrete and other hard surfaces like terrazzo present a number of technical challenges. Not to mention the new regulatory requirements that have been placed on contractors with the advent of OSHA’s new Silica Dust Standard.

Recommended Models & Applications

About These Recommendations

The recommendations given below are a starting point to help you match the work you’re doing with the right vacuum. Keep in mind there are a lot of variables from how you work with a particular tool and the model of the tool to the environment you’re working in and more. Once of you have a better feel for what Pulse-Bac is all about we recommend you spend some time speaking with us at (416) 768-7800 or speak with one of Pulse-Bac dust collection experts at 866-954-9700 that can help you tailor a solution to your specific need.

Model	Applications
550 Model	Hand Grinders and Edge Grinders up to 6" (per OSHA) Clean Up
PRO-176 Model	Hand Grinders and Edge Grinders up to 7" (per OSHA) Small Floor Ginders Integrated Floor Sweep
PRO-225 Model	Hand Grinders and Edge Grinders up to 9" (per OSHA) Small Floor Ginders Medium Floor Grinders Scarifiers Integrated Floor Sweep
PRO-311 Model	Hand Grinders and Edge Grinders up to 12" (per OSHA) Medium Floor Grinders Large Floor Grinders Soft Cut / Walk Behind Saws Scarifiers Shot Blasters Integrated Floor Sweep
HPLM Models	Large Floor Grinders XL Floor Grinders Soft Cut / Walk Behind Saws Scarifiers Large Shot Blasters

Wood Flooring Installation & Refinshing

As a wood flooring contractor you know it is important to keep the dust out of the customer’s home or office and how crucial it is to have a dust free floor before applying finish.

When it comes to controlling dust the classic solution of tarps and plastic sheeting only protect what they cover. Using a vacuum to collect the dust at its source is a much more practical solution. Vacuums have typically had a few problems that have made them less appealing in the past. Cheif among these is that the fine dust from sanding will quickly clog the filter forcing you to shake it clean. This costs time that could be spent finishing the job, so you can move on to the next one. This lost time adds up in the long run and affects your bottom line. Pulse-Bac offers a better solution. Pulse-Bac is the Original and Patented Self-Cleaning Vacuum. It’s patented Automatic Pulse-Clean Technology cleans the filter while you work using only simple physics, no compressor or pre-separator needed.

When using a vacuum to capture dust from tools like Drum Sanders, Buffers, Edgers, and Random Orbit Sanders Pulse-Bac delivers unmatched performance. Plus, Pulse-Bac HEPA Certified dust vacuums are compliant with OSHA and EPA regulations for the removal of Lead Paint, Asbestos, and Wood. So Pulse-Bac has your back no matter what the job is.

Recommended Models & Applications

About These Recommendations

The recommendations given below are a starting point to help you match the work you’re doing with the right vacuum. Keep in mind there are a lot of variables from how you work with a particular tool and the model of the tool to the environment you’re working in and more. Once of you have a better feel for what Pulse-Bac is all about we recommend you spend some time speaking with us at (416) 768-7800 or speak with one of Pulse-Bac dust collection experts at 866-954-9700 that can help you tailor a solution to your specific need.

Model	Applications
550 Model	Floor Edgers Handheld Orbital Sanders Sheet Sanders Miter Saws Jobsite Table Saws
PRO-176 Model	Floor Edgers 16" Buffer/Rotary Sander Miter Saws Jobsite Table Saws Integrated Floor Sweep
PRO-225 Model	Floor Edgers 16" Buffer/Rotary Sander Drum Sanders Miter Saws Jobsite Table Saws Integrated Floor Sweep
PRO-311 Model	16" Buffer/Rotary Sander Drum Sanders Miter Saws Jobsite Table Saws Integrated Floor Sweep
HPLM Models	Multiple Sanders Drum Sanders Miter Saws Jobsite Table Saws Cabinet Saws

General Construction

General Contractors do it all and clean up is crucial to maintaining a safe job site and keeping customers happy. So at the end of the day, they don’t need a vacuum that clogs while they’re trying to get work done. The versatility of a Pulse-Bac vacuum delivers productivity no matter how a contractor needs it, a dust collector for cutting drywall or grinding concrete, catching the trimmings from a table saw, miter saw or job site clean up at the end of the day. No matter how it’s used, Pulse-Bac can keep up so the contractor can finish up.

Recommended Models & Applications

About These Recommendations

The recommendations given below are a starting point to help you match the work you’re doing with the right vacuum. Keep in mind there are a lot of variables from how you work with a particular tool and the model of the tool to the environment you’re working in and more. Once of you have a better feel for what Pulse-Bac is all about we recommend you spend some time speaking with us at (416) 768-7800 or speak with one of Pulse-Bac dust collection experts at 866-954-9700 that can help you tailor a solution to your specific need.

Model	Applications
550 Model	Job Site Clean Up Random Orbit Sanders Sheet Sanders Miter Saws Track Saws Jobsite Table Saws Hammer Drills Hand Grinders 4"-6"
PRO-176 Model	Job Site Clean Up Random Orbit Sanders Sheet Sanders Miter Saws Jobsite Table Saws Hammer Drills Hand Grinders 7"
PRO-225 Model	Job Site Clean Up Miter Saws Jobsite Table Saws Demolition Hammers Hammer Drills Hand Grinders 7-9"
PRO-311 Model	Job Site Clean Up Miter Saws Jobsite Table Saws Contractor Saws Demolition Hammers Jack Hammers Hammer Drills Hand Grinders 7-9"

Cabinet Makers, Carpenters & Woodworkers

Recommended Models & Applications

About These Recommendations

The recommendations given below are a starting point to help you match the work you’re doing with the right vacuum. Keep in mind there are a lot of variables from how you work with a particular tool and the model of the tool to the environment you’re working in and more. Once of you have a better feel for what Pulse-Bac is all about we recommend you spend some time speaking with us at (416) 768-7800 or speak with one of Pulse-Bac dust collection experts at 866-954-9700 that can help you tailor a solution to your specific need.

Model	Applications
550 Model	Handheld Orbital Sanders Sheet Sanders Miter Saws Jobsite Table Saws Routers Benchtop Oscialting Spindle Sanders Track Saws Biscuit Joiners
PRO-176 Model	Handheld Orbital Sanders Sheet Sanders Miter Saws Jobsite Table Saws Routers Benchtop Oscialting Spindle Sanders Track Saws Biscuit Joiners
PRO-225 Model	Miter Saws Contractors Table Saws Router Tables Stationary Oscialting Spindle Sanders Track Saws
PRO-311 Model	Miter Saws Cabinet Table Saws Router Tables Stationary Oscialting Spindle Sanders Jointers Thickness Planers Drum Sanders
HPLM Models	Miter Saws Cabinet Table Saws Router Tables Stationary Oscialting Spindle Sanders Jointers Thickness Planers Drum Sanders

Concrete Masonry & Tuck Pointing

When it comes to concrete and masonry, controlling the dust is a critical situation. Not just to avoid the negative health effects caused by the silica dust concrete and masonry materials produce, but to stay outside of the reach of OSHA and their updated silica rules. Under Table 1 of the new rule, common power tools have specific regulations that must be followed when being used to work with materials like concrete, mortar, and brick. Among two of the most important being the amount of CFM your vacuum must have based on the tool being used and the type of vacuum you must have when grinding, sanding, cutting or breaking materials that contain silica. Below are several models that comply with the OSHA Silica Rule and recommendations. Remember if you plan on taking the simpler route and using Table 1 to comply with the new rule OSHA has set forth rules governing the type of vacuums that can be used and recommendations like using a vacuum that has an automatic reverse pulse cleaning mechanism like those found in Pulse-Bac vacuums.

Recommended Models & Applications

About These Recommendations

The recommendations given below are a starting point to help you match the work you’re doing with the right vacuum. Keep in mind there are a lot of variables from how you work with a particular tool and the model of the tool to the environment you’re working in and more. Once of you have a better feel for what Pulse-Bac is all about we recommend you spend some time speaking with us at (416) 768-7800 or speak with one of Pulse-Bac dust collection experts at 866-954-9700 that can help you tailor a solution to your specific need.

Model	Applications
550 Model	Job Site Clean Up Tuckpointer 4"-5" Crack Chasers 4"-5" Handgrinders up to 6" Hammer Drills
PRO-176 Model	Job Site Clean Up Tuckpointer 4"-5" Crack Chasers 4"-7" Handgrinders up to 7" Hammer Drills
PRO-225 Model	Job Site Clean Up Integrated Floor Sweep Brick Saws Small Demolition Hammers Soft/Green Cut Saws 6" Hammer Drills Hand Grinders 7-9"
PRO-311 Model	Job Site Clean Up Integrated Floor Sweep Brick Saws Soft/Green Cut Saws 10"-14" Medium-Large Demolition Hammers Jack Hammers Hammer Drills
HPLM Models	Brick Saws Soft/Green Cut Saws 10"-14" Medium-Large Demolition Hammers Large Jack Hammers Multiple Tools

Industry & Manufacturing

Manufacturers face a diverse set of challenges when they approach controlling dust generated from the various processes involved in producing their products. Whether it’s controlling dust from a saws, lathes, mills, cnc machines or others tools or simply trying to keep the facility free of remnant dust.

Recommended Models & Applications

About These Recommendations

The recommendations given below are a starting point to help you match the work you’re doing with the right vacuum. Keep in mind there are a lot of variables from how you work with a particular tool and the model of the tool to the environment you’re working in and more. Once of you have a better feel for what Pulse-Bac is all about we recommend you spend some time speaking with us at (416) 768-7800 or speak with one of Pulse-Bac dust collection experts at 866-954-9700 that can help you tailor a solution to your specific need.

Model	Applications
550 Model	Hand Grinders and Edge Grinders up to 6" Miter Saws Small Band Saws Handheld Sanders Clean Up
PRO-176 Model	Hand Grinders and Edge Grinders up to 7" Small Stationary Tools Miter Saws Small Band Saws Handheld Sanders Facility Clean-up Integrated Floor Sweep
PRO-225 Model	Hand Grinders and Edge Grinders up to 7" Medium Stationary Tools Miter Saws Small Band Saws Handheld Sanders Facility Clean-up Integrated Floor Sweep
PRO-311 Model	Medium to Large Stationary Tools Band Saws Drum Sanders Facility Clean-up Integrated Floor Sweep
HPLM Models	Multiple Tools Large Stationary Tools Band Saws Drum Sanders Facility Clean-up

Lead Paint & Asbestos Abatement

Lead paint and Asbestos removal present unique challenges for both dedicated abatement contractors and general contractors who run into these materials on the job site. From personal exposure issues to the regulatory concerns from OSHA and the EPA. For those trying to comply with regulations like the EPA RRP rule the level of scrutiny required is high. Pulse-Bac has dust collection and clean-up solutions specifically tailored to abatement tasks. The models recommended in the table below both feature our Dual-Stage Certified HEPA filtration system. This means that the air taken in by the vacuum passes through an individually tested and Certified HEPA Filter in front of the motor and the air exhausted from motor passes through an additional individually tested and Certified HEPA Filter. This ensures that when you’re dealing with toxic/hazardous materials like lead paint and asbestos that you get the maximum level of filtration. In fact, third-party testing of the 550H showed that our 2 stage filtration system actually provided 99.99% @ 0.3µm filtration, exceeding the standard.

Recommended Models & Applications

About These Recommendations

The recommendations given below are a starting point to help you match the work you’re doing with the right vacuum. Keep in mind there are a lot of variables from how you work with a particular tool and the model of the tool to the environment you’re working in and more. Once of you have a better feel for what Pulse-Bac is all about we recommend you spend some time speaking with us at (416) 768-7800 or speak with one of Pulse-Bac dust collection experts at 866-954-9700 that can help you tailor a solution to your specific need.

Model	Applications
550H Model	Job Site Clean Up Random Orbit Sanders Sheet Sanders Edge Sanders Miter Saws Hand Grinders 4"-6"

Firing Range Cleanup

The dust left in an indoor fire range at the end of the day is a serious concern from both a health and safety standpoint. The accumulation of lead particulate presents a challenge from the health side and presents a regulatory concern as well. That is why we recommend the PRO Series with the Integrated Floor Sweep for firing ranges. The Integrated Floor Sweep makes cleaning up the lead and powder residue quick and easy. For an extra layer of protection use the 550H which features our Dual-Stage HEPA Filtration. With two sets of HEPA filters one on the intake side and another on the exhaust side providing the best HEPA level filtration available.

Recommended Models & Applications

About These Recommendations

The recommendations given below are a starting point to help you match the work you’re doing with the right vacuum. Keep in mind there are a lot of variables from how you work with a particular tool and the model of the tool to the environment you’re working in and more. Once of you have a better feel for what Pulse-Bac is all about we recommend you spend some time speaking with us at (416) 768-7800 or speak with one of Pulse-Bac dust collection experts at 866-954-9700 that can help you tailor a solution to your specific need.

Model	Applications
PRO-176 Model w/Floor Sweep	Integrated Floor Sweep Clean Up